Chủ Nhật, 5 tháng 9, 2010

Mixing console

Mixing console
From Wikipedia, the free encyclopedia
Jump to: navigation, search
This article needs attention from an expert on the subject. See the talk page for details. WikiProject Professional sound production may be able to help recruit an expert. (February 2010)
Question book-new.svg
This article needs additional citations for verification.
Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (February 2010)

In professional audio, a mixing console, or audio mixer, also called a sound board, soundboard, mixing desk, or mixer is an electronic device for combining (also called "mixing"), routing, and changing the level, timbre and/or dynamics of audio signals. A mixer can mix analog or digital signals, depending on the type of mixer. The modified signals (voltages or digital samples) are summed to produce the combined output signals.

Mixing consoles are used in many applications, including recording studios, public address systems, sound reinforcement systems, broadcasting, television, and film post-production. An example of a simple application would be to enable the signals that originated from two separate microphones (each being used by vocalists singing a duet, perhaps) to be heard through one set of speakers simultaneously. When used for live performances, the signal produced by the mixer will usually be sent directly to an amplifier, unless that particular mixer is "powered" or it is being connected to powered speakers.
BBC Local Radio Mark III radio mixing desk

* 1 Structure
* 2 Channel input strip
o 2.1 Basic input controls
o 2.2 Auxiliary send routing
o 2.3 Channel equalization
o 2.4 Subgroup and mix routing
* 3 Master output controls
* 4 Metering
* 5 Hardware routing and patching
* 6 Other features
* 7 Digital versus analog
o 7.1 Propagation delay
o 7.2 Ease of use
o 7.3 Sound quality
o 7.4 Remote control
o 7.5 Virtual mixing
* 8 Applications
* 9 Mixing console manufacturers
* 10 See also
* 11 References
* 12 External links

[edit] Structure
Yamaha 2403 audio mixing console in a 'live' mixing application

A typical analog mixing board has three sections:

* Channel inputs
* Master controls
* Audio level metering

The channel inputs are replicated monaural or stereo input channels with pre-amp controls, channel fader and pan, sub-group assignment, equalization and auxiliary mixing bus level controls. The master control section has sub-group faders, master faders, master auxiliary mixing bus level controls and auxiliary return level controls. In addition it may have solo monitoring controls, a stage talk-back microphone control, muting controls and an output matrix mixer. On smaller mixers the inputs are on the left of the mixing board and the master controls are on the right. In larger mixers, the master controls are in the center with inputs on both sides. The audio level meters may be above the input and master sections or they may be integrated into the input and master sections themselves.
[edit] Channel input strip

The input strip is usually separated into these sections:

* Input jacks / microphone preamplifiers
* Basic input controls
* Channel EQ (High, Mids and low)
* Routing Section including Direct Outs, Aux-sends, Panning control and Subgroup assignments
* Input Faders

On the Yamaha Console above, these sections are color coded for quick identification by the operator. Each signal that is input into the mixer has its own channel. Depending on the specific mixer, each channel is stereo or monaural. On most mixers, each channel has an XLR input, and many have RCA or quarter-inch Jack plug line inputs.
[edit] Basic input controls

Below each input, there are usually several rotary controls (knobs, pots). The first is typically a trim or gain control. The inputs buffer the signal from the external device and this controls the amount of amplification or attenuation needed to bring the signal to a nominal level for processing. This stage is where most noise of interference is picked up, due to the high gains involved (around +50 dB, for a microphone). Balanced inputs and connectors, such as XLR or Tip-Ring-Sleeve (TRS) quarter-inch connectors, reduce interference problems.

There may be insert points after the buffer/gain stage, which send to and return from external processors which should only affect the signal of that particular channel. Insert points are most commonly used with effects that control a signal's amplitude, such as noise gates, expanders, and compressors.
[edit] Auxiliary send routing

The Auxiliary send routes a split of the incoming signal to an auxiliary bus which can then be used with external devices. Auxiliary sends can either be pre-fader or post-fader, in that the level of a pre-fade send is set by the Auxiliary send control, whereas post-fade sends depend on the position of the channel fader as well. Auxiliary sends can be used to send the signal to an external processor such as a reverb, which can then be routed back through another channel or designated auxiliary returns on the mixer. These will normally be post-fader. Pre-fade auxiliary sends can be used to provide a monitor mix to musicians onstage, this mix is thus independent of the main mix.
Mixing desk used for live performances.
[edit] Channel equalization

Further channel controls affect the equalization (EQ) of the signal by separately attenuating or boosting a range of frequencies, e.g., bass, midrange, and treble. Most large mixing consoles (24 channels and more) usually have sweep equalization in one or more bands of its parametric equalizer on each channel, where the frequency and affected bandwidth of equalization can be selected. Smaller mixing consoles have few or no equalization controls. Care must be taken not to add too much EQ to a signal that is already close to clipping; additional energy will overdrive the channel.

Some mixers have a general equalization control (either graphic or parametric) at the output.
[edit] Subgroup and mix routing

Each channel on a mixer has an audio taper pot, or potentiometer, controlled by a sliding volume control (fader), that allows adjustment of the level, or amplitude, of that channel in the final mix. A typical mixing console has many rows of these sliding volume controls. Each control adjusts only its respective channel (or one half of a stereo channel); therefore, it only affects the level of the signal from one microphone or other audio device. The signals are summed to create the main mix, or combined on a bus as a submix, a group of channels that are then added to get the final mix (for instance, many drum mics could be grouped into a bus, and then the proportion of drums in the final mix can be controlled with one bus fader).

There may also be insert points for a certain bus, or even the entire mix.
[edit] Master output controls

Subgroup and main output fader controls are often found together on the right hand side of the mixer or, on larger consoles, in a center section flanked by banks of input channels. Matrix routing is often contained in this master section, as are headphone and local loudspeaker monitoring controls. Talkback controls allow conversation with the artist through their wedges, headphones or IEMs (in-ear monitor). A test tone generator might be located in the master output section. Aux returns such as those signals returning from outboard reverb devices are often in the master section.
[edit] Metering

Finally, there are usually one or more VU or peak meters to indicate the levels for each channel, or for the master outputs, and to indicate whether the console levels are overmodulating or clipping the signal. Most mixers have at least one additional output, besides the main mix. These are either individual bus outputs, or auxiliary outputs, used, for instance, to output a different mix to on-stage monitors. The operator can vary the mix (or levels of each channel) for each output.

As audio is heard in a logarithmic fashion (both amplitude and frequency), mixing console controls and displays are almost always in decibels, a logarithmic measurement system. This is also why special audio taper pots or circuits are needed. Since it is a relative measurement, and not a unit itself (like a percentage), the meters must be referenced to a nominal level. The "professional" nominal level is considered to be +4 dBu. The "consumer grade" level is −10 dBV.
[edit] Hardware routing and patching

For convenience, some mixing consoles include inserts or a patch bay or patch panel. Patch bays are mainly used for recording mixers.
[edit] Other features
The Audient 2802 Console has integrated DAW control
This file is a candidate for speedy deletion. It may be deleted after seven days from the date of nomination.

Most, but not all, audio mixers can

* add external effects.
* use monaural signals to produce stereo sound by adjusting the position of each signal on the sound stage (pan and balance controls).
* provide phantom power (typically 48 volts) required by some microphones.
* create an audible tone via an oscillator, usually at 440 Hz, 1 kHz, or 2 kHz

Some mixers can

* add effects internally.
* read and write console automation.
* be interfaced with computers or other recording equipment (to control the mixer with computer presets, for instance).
* control or be controlled by a Digital Audio Workstation via Midi or proprietary commands.
* be powered by batteries.

[edit] Digital versus analog
Digidesign's Venue Profile mixer on location at a corporate event. This digital mixer allows plugins from third-party vendors

Digital mixing console sales have increased dramatically since their introduction in the 1990s. Yamaha sold more than 1000 PM5D mixers by July, 2005,[1] and other manufacturers are seeing increasing sales of their digital products. Digital mixers are more versatile than analog ones and offer many new features, such as the ability to save multiple mute groups, multiple VCA groups and channel settings into a scene and reconfigure signal routing at the touch of a button. The faders can be "swapped" or "flipped" to show aux send levels; a feature very useful in mixing artists' monitors. In addition, digital consoles often include a range of special effects such as parametric EQ, compression, gating, reverb, automatic feedback reduction, tap delay and straight delay. Some products are expandable via third-party software features (called plugins) that add further reverb, compression, delay and tone-shaping tools. Several digital mixers include spectrograph and real time analyzer functions. A few incorporate loudspeaker management tools such as crossover filtering and limiting. Digital signal processing can perform automatic mixing for some simple applications, such as courtrooms, conferences and panel discussions, but at this time no digital mixer in live audio includes automixing. Consoles with motorized faders can read and write console automation.

Digital mixers can be designed to be quieter than most analog mixers, as digital mixers often incorporate very low threshold noise gates to stop inactive mix bus background hiss from summing with active signals. Digital circuitry is more resistant to outside interference from radio transmitters such as walkie-talkies and cell phones.
[edit] Propagation delay

Digital mixers have an unavoidable amount of latency or propagation delay, ranging from 1.5 ms to as much as 10 ms, depending on the model of digital mixer and what functions are engaged. This small amount of delay isn't a problem for loudspeakers aimed at the audience or even monitor wedges aimed at the artist, but can be disorienting and unpleasant for IEMs (In ear monitors) where the artist hears their voice acoustically in their head and electronically amplified in their ears but delayed by a couple of milliseconds.

Every analog to digital conversion and digital to analog conversion within a digital mixer entails propagation delay. Audio inserts to favorite external analog processors make for almost double the usual delay. Further delay can be traced to format conversions such as from ADAT to AES3 and from normal digital signal processing steps.

Within a digital mixer there can be differing amounts of latency, depending on the routing and on how much DSP is in use. Assigning a signal to two parallel paths with significantly different processing on each path can result in extreme comb filtering when recombined. Some digital mixers incorporate internal methods of latency correction so that such problems are avoided.
[edit] Ease of use
16-channel mixing console with compact short-throw faders

Analog consoles remain popular due to their continuing to have one knob, fader or button per function, a reassuring feature for the user. This takes up more physical space but allows more rapid response to changing performance conditions. Most digital mixers take advantage of the technology to reduce the physical space requirements of their product, entailing compromises in user interface such as a single shared channel adjustment area that is selectable for only one channel at a time. Additionally, most digital mixers have virtual pages or layers which change the fader banks into separate controls for additional inputs or for adjusting equalization or aux send levels. This layering can be confusing for operators.

Analog consoles make for simpler understanding of hardware routing. Many digital mixers allow internal reassignment of inputs so that convenient groupings of inputs appear near each other at the fader bank, a feature that can be disorienting for persons having to make a hardware patch change.

On the other hand, many digital mixers allow for extremely easy building of a mix from saved data. USB flash drives and other storage methods are employed to bring past performance data to a new venue in highly portable manner. At the new venue, the traveling mix technician simply plugs the collected data into the venue's digital mixer and quickly makes small adjustments to the local input and output patch layout, allowing for full show readiness in very short order.

Some digital mixers allow offline editing of the mix, a feature that lets the traveling technician use a laptop to make anticipated changes to the show while en route, further shortening the time it takes for the sound system to be ready for the artist.
[edit] Sound quality

Both digital and analog mixers rely on analog microphone preamplifiers, a high-gain circuit that is the origin of much of the perceived character of sound quality in an audio mixer. In this respect, both formats are on par with each other. In a digital mixer, the microphone preamplifier is followed by an ADC which quantizes the audio stream. Ideally, this process is carefully engineered to deal gracefully with overloading and clipping while delivering an accurate digital stream over the linear dynamic range. Further processing and mixing of digital streams within a mixer need to avoid clipping and truncation if maximum audio quality is desired.

Analog mixers, too, must deal gracefully with overloading and clipping at the microphone preamplifier and as well as avoiding overloading of mix buses. Background hiss in an analog mixer is always present, though good gain stage management minimizes its audibility. Idle subgroups left "up" in a mix will add their background hiss to the main outputs; many digital mixers avoid this problem by low-level gating.

Many electronic design elements combine to affect perceived sound quality, making the global "analog mixer vs. digital mixer" question difficult to answer. Controlled ABX double-blind listening tests have not been published at this date; no conclusive answer can be reached. Experienced live sound professionals agree that microphones and loudspeakers (with their innate higher distortion levels) are a much greater source of coloration of sound than the choice of mixer. The mix style of the person mixing is also more important than the make and model of audio console. Analog and digital mixers both have been associated with extremely high-quality concert performances and studio recordings.
[edit] Remote control

Analog mixing in live sound has had the option since the 1990s of using wired remote controls for certain digital processes such as monitor wedge equalization and parameter changes in outboard reverb devices. That concept has expanded until wired and wireless remote controls are being seen in relation to entire digital mixing platforms. It's possible to set up a sound system and mix via wireless (or wired) laptop, touchscreen or tablet, especially if the performance requires no unpredictable fast responses to multiple changing conditions on stage. Computer networks can connect digital system elements for expanded monitoring and control, allowing the system technician to make adjustments to distant devices during the performance. The use of remote control technology can be utilized to reduce "seat-kills", allowing more paying customers into the performance space.
[edit] Virtual mixing

Increasingly, the mixing process can be performed on screen, using computer software and associated input, output and recording hardware. The traditional large control surface of the mixing console is not utilized, saving space at the engineer's mix position. Some virtual mixing (such as the Gamble DCX[2]) uses digital controls of analog audio circuitry, but most virtual mixers are fully digital so as to save cost and physical space. In the virtual studio, there is either no normal mixer fader bank at all or there is a compact group of motorized faders designed to fit into a small space and connected to the computer via USB or Firewire. Many project studios use such a space-efficient solution, as the mixing room at other times can serve as business office, media archival, etc. Virtual mixing is heavily integrated as part of a digital audio workstation.
[edit] Applications
A Behringer EuroRack UB1002FX in a DJ setup

Dub producers/engineers such as Lee "Scratch" Perry were perhaps the first musicians to use a mixing board as a musical instrument.

Public address systems will use a mixing console to set microphones for different speakers to the correct level, and can add in recorded sounds into the mix. A major requirement is to minimise audio feedback.

Most bands will use a mixing console to combine musical instruments and vocals to the correct level.

Radio broadcasts use a mixing desk to select audio from different sources, such as CD players, telephones, remote feeds, or prerecorded advertisements.

Noise music musicians such as Merzbow or Wolf Eyes may create feedback loops within mixers, creating an instrument known as a no-input mixer. The tones generated from a no-input mixer are created by connecting an output of the mixer into an input channel and manipulating the pitch with the mixer's dials.
[edit] Mixing console manufacturers

* Alesis
* Allen & Heath
* Audient
* Automated Processes, Inc.
* AMS Neve
* Behringer
* Cadac Electronics
* Calrec
* Carvin A&I
* Crest Audio
* D&R
* DiGiCo
* Digidesign
* DigiTech
* Euphonix
* Fairlight
* Daniel Flickinger
* Harris Corporation
* Harrison Audio Consoles
* Innovason
* Klotz Digital
* Langevin
* Mackie
* Midas Consoles
* Peavey
* Phonic Corporation
* Pioneer Corporation
* Presonus
* Rane Corporation
* Roland Corporation
* Samick
* Samson Technologies
* Shure
* Solid State Logic
* Soundcraft
* Sound Workshop
* Speck Electronics
* Studer
* Studiomaster
* Tapco
* Tascam
* Ward-Beck Systems
* Yamaha Pro Audio

Không có nhận xét nào:

Đăng nhận xét

Lưu trữ Blog